Wednesday, 28 December 2011

Riding the Rails in Rockhill Furnace, Pennsylvania

!: Riding the Rails in Rockhill Furnace, Pennsylvania

Tucked into the pocket of a pair of hundred-year-old railroad engineer coveralls, you are instantly returned to an era of vintage rail transportation here. Like triumphantly raised arms, two silver smokestacks proclaim their victory over time, which otherwise seems suspended by the sprawling, wooden, red-painted shop complex surrounding it, modified by not a single nail since it first rose from the ground. A cobweb of tracks, imbedded in the artery which divides the twin boroughs of Rockhill Furnace and Orbisonia, merges into three in front of the depot, which bears the latter's name, departure point for one of three daily, narrow-gauge, steam locomotive-pulled trains operating as the East Broad Top Railroad. The clang of a bell, rung across the street, indicates the arrival of a bright red trolley car from the opposite direction.

Tourists ride the rails today; coal miners rode them yesterday.

Cradled by Blacklog Mountain and both Saddleback and Sandy Ridges, the area, then undeveloped, beckoned prospectors with its natural resources, consisting of agricultural land, water, timber, coal, and iron, the Blacklog Creek both feeding and leading them to what would become its twin boroughs.

Initially serving as a Native American campsite and hunting ground, as evidenced by archeological traces found at Sandy Ridge, the area first took root in 1754 when land was purchased from Six Nations, and the first road, mimicking the original Indian path and fostering westward expansion of settlers, was created 33 yeas later, stretching between Burnt Cabins in the south and Huntingdon in the north.

Bedford Furnace, the area's first village, evolved from a trading post in 1760. Providing both a sense of location and permanence, it attracted the first white settler, George Erwin, who established a trading post in a log cabin, shipping goods over narrow, wilderness-tunneling trails and exchanging them with travelers and Native Americans alike.

Placing the initial pin into the map, the Bedford Furnace Company established a charcoal furnace in order to be able to produce iron in 1785, sparking growth in the Juniata Valley and serving as the first of many to eventually characterize it.

Rockhill Furnace Number 1, built in 1831 by Thomas Diven and William Morrison south of the town in Blacklog Narrows, replaced the smaller, original plant, while Winchester Furnace, the third such ironworks, rose a few hundred yards away.

Abandoned in 1850 after a less-than-prosperous reign, it was joined seven years later by furnace Number 1 when area deforestation depleted the timber necessary for iron smelting charcoal, although the Civil War once again-albeit temporarily-re-lit its fires.

A mortgage foreclosure preceded its purchase in 1867, but its resurrection now hinged upon a fuel source to feed it. The needed pot of gold at the end of the rainbow-or, in this case, on top of the rainbow-came in the form of coal discovered on Broad Top Mountain. What was now required was a method to transport it from its summit-located mines to the iron furnaces in the east.

East Broad Top Railroad:

During the early-1850s, Pennsylvania's Juniata Valley began to sprout rails.

The single track of Pennsylvania Central Railways, thread through the narrow mountain passes and along the Juniata River, connected Lewistown and Huntingdon, for the first time offering a non-aquatic, intrastate transportation alternative to the Public Work's Main Line Canal. The Pennsylvania Railroad's own all-rail line soon grew branches throughout the Allegheny Mountains, allowing it to penetrate hills and valleys in order to collect and haul the region's riches in the form of lumber and coal. Track laid between 1853 and 1854 enabled the Huntingdon and Broad Top Railway to surmount its very namesaked incline on the west side. But rail access remained a void on its east.

Although the necessary charter for such a rail line had been granted on April 16, 1856, several proposals-and 14 years-ensued before a group of Philadelphia businessmen, spurred by the Civil War's cry for additional track to move troops and supplies, collected the required capital to construct one, forming, with the aid of the still-born charter, the East Broad Top Railroad and Coal Company on July 3, 1871. It was decided, from the outset, to employ three-foot, narrow gauge track in order to reduce construction and operating costs and facilitate tighter turns.

The first track was put to bed on September 16 of the following year and its first locomotive, a 17.5-ton, wood-burning, narrow-gauge 2-6-0 built by the Baldwin Locomotive Works of Philadelphia and named the "Edward Roberts," was delivered a year after that.

Like a journey of time, track-laying could be measured by the calendar, the first 11 miles of it reaching Rockhill Furnace on August 30, 1873, ascending Sideling and Wrays Hills before arriving in Robertsdale the following year-all for the purpose of transporting coal and forestry products from Broad Top Mountain to Mount Union, its southern terminus, for transfer to standard-gauge Pennsylvania Railroad trains.

The original village of Rockhill Furnace, taking shape round the iron furnaces a half-mile from the current depot on the banks of Blacklog Creek, progressively expanded.

The fleet equally multiplied when three 26-ton Baldwin Consolidation engines were acquired between late-1873 and early-1874, the same year that the Robertsdale-mined coal was first rail-transported to Rockhill Furnace to fuel the blast furnaces now taken over by the newly-formed Rockhill Iron and Coal Company to ultimately produce pig iron.

As a town, Rockhill Furnace took initial form as a dual-stack iron furnace and collection of coke ovens, which expanded into the East Broad Top Railroad shop complex lining the Jordan Creek-a veritable pocket of self-sufficiency.

Occupying the farmland purchased for the complex and employing the original, still-existent stone farmhouse for its administrative offices, the soon-sprawling plant's gears were turned by means of its steam-powered overhead shafts and belts, with additional electricity and compressed air generated by its boiler plant, pumping current, like flowing blood, to its foundry and machine, car, and blacksmith shops. Its brick roundhouse, eventually encompassing eight stalls, facilitated alignment with the needed track, provided light locomotive maintenance, and served as a storage shed, while heavy repairs occurred in the machine shop. Commodities necessary for steam engine operation, including water, coal, and sand, were stored throughout the complex, which itself was capable of the locomotive repair and maintenance functions themselves, as well as rolling stock manufacture and the production of forgings, castings, and machine parts for both the railroad and the mines it accessed.

The yard's wye, formed by track from Mount Union and crossing Meadow Street (Pennsylvania Route 994) just past the Orbisonia depot, facilitated intra-complex car movement, storage positioning, and train configuration, providing access to either Alvan or the Shade Gap Branch, depending upon car orientation.

Indeed, the shop complex served as one of many links in a chain, none of which could have existed without the other, inclusive of the area's natural resources giving rise to the iron smelting industry, the railroad needed to transport the coal to fuel it, the shops to manufacture and maintain its equipment, and the town arising to support the workforce which turned its gears.

Its fleet initially encompassed two passenger coaches, two baggage cars, and 176 freight and coal hopper cars.

From the mainline, which extended from Robertsdale to Woodvale in 1891 and Alvan in 1916, spur tracks spread like arteries from a central vein as additional mines were bored, resulting in the Shade Gap, Shade Valley, Booher Mine, Rocky Ridge, Number 7 and Number 8, Coles Valley, and NARCO branches, and the Shirleysburg clay spur.

With progressive expansion and prosperity, the East Broad Top Railroad began to carry passengers over and above the standard miners, coal, and freight for whom and for which it had been conceived.

The beginning of the 20th century signaled the railroad's infrastructure modernization program. Iron rails, for example, were replaced by steel ones. Wood was equally swapped for steel on trestles and bridges, and the durable metal for the first time formed its freight cars.

In 1926, coal-in addition to iron ore, quartzite ganister rock, forest products, and other miscellany-constituted 80 percent of its freight, exceeding 26 million ton-miles alone.

According to East Broad Top Railroad Timetable Number 53, effective Monday, September 29, 1930, it covered the 33-mile main line route from Mount Union to Alvan in one hour, 45 minutes, one southbound run departing at 0920 and arriving at 1105 via Allenton, Adams, Aughwick, Pump Station, Shirleysburg, Orbisonia, Pogue, Three Springs, Saltillo, Fairview, Kimmel, Coles, Rocky Ridge, Wrays Hill, Cooks, Robertsdale, and Woodvale.

Like everything in life, however, the railroad experienced both peaks and troughs. When the depression sunk its teeth into its profits, it was reorganized, simply, as the Rockhill Coal Company, and J. William Wetter assumed the presidency of both the iron furnace and the railroad which fed it.

Exerting its demands for commodities, however, World War II temporarily re-lit the fires in its furnaces, and strip-mining joined its list of coal and ganister rock extractions for the first time.

Inevitably, with the iron supply dwindling and coal the only commodity left to haul, the end of the line-literally-loomed ahead. Passenger rail services from Mount Union to Woodvale, initially curtailed from the two daily, Monday-to-Saturday round-trips, to a single one, were altogether discontinued on August 15, 1954, leaving coal as its sole, and increasingly unprofitable, type of freight. Mount Union brick plants, converting from coal to natural gas, no longer needed it for their own viability, while the proliferation of rail-replacing roads hammered the final anvil into the line. Mail, now transferred to truck transport, obviated the need for the post office contract.

The Rockhill Coal Company terminated its coal shipment requirements on March 31 and the East Broad Top Railroad's raison d'être essentially ended.

The last service, a round-trip from Rockhill Furnace to Mount Union via Saltillo and operated by 161,000-pound locomotive Number 17-a Baldwin 2-8-2 built in 1918-occurred on April 6, 1956, while all common carrier operations mimicked the event a little less than a month later, on May 1.

Stretching throughout the area, from Mount Union and climbing Broad Top Mountain on its east side, its mainline track network, along with its numerous, initially-intact branch lines, appeared like the cobwebs clinging to once-useful pieces of history, but now relegated to relics, their only associated movement, albeit in painstakingly slow form, being the weeds and grasses which sprouted between their cross-ties until they camouflaged them.

Not far behind was a second onslaught-in the form of the Kovalchick Salvage Company of Indiana, Pennsylvania--which had purchased the entire system, including its locomotives, cars, stations, shops, buildings, company houses, rights-of-way, and the land from which the once-precious coal commodity had been removed.

Four years passed. A few branch lines were uprooted. A handful of cars was sold to rail fans who insisted on owning a tangible piece of history. The weeds continued to aggressively attack and conquer the tracks. But, strangely, the dismantling company did not.

Indeed, instead of eradicating this piece of narrow gauge, steam railroad and coal mining history from the stage where it had been enacted, Nick Kovalchick, president of his company, became preservationist of it, rising from salvager to savior.

The East Broad Top Railroad's first re-purposed spark was lit by Orbisonia's one-week bicentennial celebration, whose cornerstone was the very rail line which had given birth to it, perhaps reflecting an act of creation, in which nothing truly dies.

Replacing tourists with coal, the trains would once again ply the tracks, offering return-to-history excursions. Cleared of underbrush, and given the necessary repairs, they once again supported railroad life when locomotive Number 12, a 1911 2-8-2 Baldwin, was christened with ginger ale by Kovalchick's daughter, Millie, on August 13, 1960.

Pulling two converted, open-air and four passenger coaches over the hitherto 3.5 miles of resurrected rail, it chugged, belched, and hissed black smoke and white steam, returning to the natural element for which it had been designed, as far as Colgate Grove. Because a wye had not been remedially installed until later, locomotive Number 15, having followed the proud, narrow gauge chain, pulled it back to the Orbisonia station.

Instead of departing history, the railroad, now under command of new president, Nick Kovalchick, has been returning to it ever since.

Designated a Registered National Historic Landmark by the United States Department of Interior in 1964, it is both the oldest-and oldest still-operating-narrow gauge railroad east of the Rocky Mountains, and today ranks as one of the "top tucks" into the preserved pockets of narrow gauge steam railroad history.

Tourists and locals alike retrace the bicentennial path, now stretching five miles, on one of three round-trip weekend excursion trains during May, June, and September; on Thursday-to-Sunday frequencies from July to mid-August; and during three-day, Friday-to-Sunday periods in October, covering the ten miles during 70-minute runs, ten minutes of which constitute a pause in Colgate Grove. Special and theme trains are offered on Mother's Day, Independence Day (accompanied by appropriate fireworks), Civil War weekends, on Labor Day, during the fall foliage season, on Halloween, and on Polar Express trips in December. Children-applicable trains are pulled by Thomas the Tank engines.

Although some 25 different steam locomotives plied the East Broad Top Railroad's tracks throughout its history, eight-comprised of six narrow gauge 2-8-2s and two standard gauge 0-6-0s-remain today, one of which is stored at the Whitewater Valley Railroad in Indiana. Most of the others continue to occupy their original residences-the roundhouse in the Rockhill Furnace shop complex.

The Number 3, a Baldwin standard gauge 0-6-0 built in 1923, was restricted to operations in the Mount Union switching yard and at the coal cleaning plant. The last and most powerful of the type, it was retired in April of 1956 and is stored in the Mount Union engine house.

The Number 12, a Baldwin 2-8-2 constructed in 1911, was contrastively the first and smallest Mikado to have been acquired, capable of hauling up to 15 loaded hopper cars from the coals mines. It was last used in 2000.

Of the same class as its Number 12 predecessor, the Number 14, built in 1912, was the second narrow gauge locomotive to be acquired, featuring both increased weight and power.

Still greater capability was offered by the Number 15, constructed in 1914, to satisfy increasing demand, enabling it to pull up to 18 loaded hopper cars.

The first of three large Mikados, the Number 16 of 1916, introduced superheaters, piston valves, and a Southern gear valve. It was retired a year before the original East Broad Top Railroad discontinued service, in 1955.

The succeeding Number 17 became the only heavy Mikado to be provisioned for tourist train service, while the number 18, the last and largest in the fleet, was retired in 1956. Like the other two in its class, it could pull 22 loaded hopper cars.

Several passenger cars, all coated in dark green, also encompass its fleet.

Of the coaches the railroad purchased from the Boston, Revere Beach, and Lynn, and the Air Sable and Northwestern, a single coach, two combinations, and the president's car remained after the others were sold at the conclusion of the line's passenger service. Six freight cars were converted to this configuration to enable it to write its tourist train chapter.

Coach Number 8, for instance, hails from 1882 and was constructed by the Laconia Car Company before having been acquired by Boston, Revere Beach, and Lynn in 1916.

Combine cars 14 and 15 share the same lineage.

Parlor car 20, now serving as the East Broad Top's first class coach usually appendaged to the end of the train, had been constructed in 1882 by Billmeyer and Smalls and was subsequently acquired from Big Level and Kinzua in September of 1907 for use as Railroad President Robert Seibert's personal coach.

Several other types make up the fleet, including flat, box, baggage, freight, and track cars, motorcars, cabooses, and diesel locomotives.

Today's tourist trains continue to depart from the "Orbisonia" station, a wooden, two-story, clapboard depot located on the north side of Meadow Street, just beyond the crossing point from the shop complex. It served as the railroad's operating headquarters after it moved from its initial, Marble House residence on a ridge behind the shop buildings. According to Vagel Keller, of the Friends of East Broad Top-a 501.c.3 historical and preservation society-"the current Orbisonia station (is) located in the borough of Rockhill Furnace, while the namesake is one-forth of a mile east... The station at this place was originally known as 'Rockhill,' and in 1888 the village got a post office called 'Rockhill Furnace.' Apparently, this caused misrouting of mail intended for an older post office in Pennsylvania named 'Rockhill,' and at about the same time that the current station was being built in 1906, the US Postal Service asked the East Broad Top to rename the station to avoid confusion... Paradoxically, the re-named 'Orbisonia Station' hosted the Rockhill Furnace post office until shortly after the end of common carrier operations."

During its heyday, its waiting room was alive with train crews, clerks, and passengers. Today, it serves as a gift shop still sporting its original wire ticket window, and from here passengers file through the door to a wooden, boardwalk-type porch, serving as a "platform," to await the train beneath the later-added, full-length trackside canopy.

The actual journey, in a choice of open, coach, or first class cars, plies the original, three-foot-wide, narrow gauge track and passes Orbisonia, farms, and forests before pausing at Colgate Grove after negotiating the wye, location of the East Broad Top's Shirleysburg clay spur, whose track had been laid in 1918 and had stretched from the grove itself to the base of the fire clay quarry on Sandy Ridge. Short-lived, its rails were removed in 1927, and the current wye, employing part of its right-of-way and constructed in 1961, resolved the train turn-around obstacle encountered during the bicentennial celebration excursions.

Today's passengers can remain at the grove either during the two-hour interval until the next run or overnight, but, since it offers little more than a barbecue and a scatter of picnic tables, all food, drink, and gear must be self-provided.

The East Broad Top offers two educational, railroad era-immersive programs. The first, designated "Engineer for an Hour," allows the rider to step into the shoes of an engineer and fireman by riding in the cab of a steam locomotive during one of the regularly scheduled trips, operating the throttle, blowing the whistle, and shovel-replenishing the firebox with coal. The second, "High Iron University/Rail Camp," is a five-day program offered in conjunction with Altoona's Railroaders Memorial Museum, and provides an indepth look at operating a steam powered railroad.

Aside from the train trip, rides are also offered in speeder, M-3, and handcars.

Another immersive experience is a tour of the railroad's shop complex, which served as the heart of its operation. Seemingly immune to time's sweep, it appears exactly as it did a century ago. The silver smokestacks mark the location of the Babcock and Wilcox boilers, which provided the steam needed to run the belt-driven equipment, while the red-painted buildings consist of the blacksmith, car, machine, and carpentry shops, pattern house, foundry, and lumber shed.

According, again, to Vagel Keller, "Another persistent myth holds that the current shops and roundhouse were built to replace earlier structures destroyed by a fire in 1882...The fire myth is based on oral traditions that conflate a cyclonic windstorm in the fall of 1881, which blew down part of the roundhouse (surviving today as the four arched doorways on the eastern half of the present structure), and on a fire in the early 1900s, which destroyed the paint shop and adjacent boiler shop. The roundhouse you see today originated with the four eastern stalls in 1874, was expanded to six stalls by 1895, and to its present form after 1911. The current shop complex originated in 1882 after the superintendent of the railroad prevailed on the Board of Directors to authorize the purchase of machine tools. Like the roundhouse, the shops were expanded over the years, taking their present form by 1911."

Rockhill Trolley Museum:

Sharing the dual-gauge portion of the rails in the yard across from the East Broad Top depot, the Rockhill Trolley Museum, billing itself as "Pennsylvania's first operating" one, affords the visitor a second opportunity to sink himself into vintage transportation history, plying the track to cover distance while distancing himself from time.

Powered by 600 volts of direct current collected by a continuous, overhead copper wire by means of a sliding shoe positioned at the end of a pole, electric trolleys, like trains, run on tracks, each of their under-floor motors usually powering a pair of wheels. An electric motor-driven air compressor channels pressure to their brakes. Internally, conductors check tickets and collect fares.

Tracing their origins to horse-drawn cars, trolleys, in their earliest forms, were small, wooden, four-wheeled vehicles, providing inter-city transportation. Demand, paralleling metropolis growth, soon necessitated larger cars, later constructed of steel, for passenger, freight, and mail transport, and by 1918, the trolley transportation industry had become the country's fifth-largest. Pennsylvania alone was served by 116 such trolley lines, which covered more than 4,600 miles of track.

But, as cities stretched, like taffy, into suburbs and were increasingly accessed by roadways, need for this transportation system declined, leaving only Philadelphia and Pittsburgh to run their lines after 1960, when Johnstown became the last small urban area to cease using its own.

Because it offers an inexpensive, pollution-free alternative to inner-city transportation, some existing track and related system components have been restored, which could be considered a budding stage of resurgence, modern cars or light-rail vehicles once again crisscrossing streets, intermixed with individual car and bus traffic.

This important trolley history can be experienced at the Rockhill Trolley Museum, which thus offers a second, rail-based transportation focus to Rockhill Furnace. Established in 1960, it acquired its first trolley car, the "Johnstown" Number 311, from its namesaked city. Built by the Wason Manufacturing Company of Springfield, Massachusetts, in 1922, it initially served in Bangor, Maine, before being sold to the Johnstown Traction Company, with which it performed a similar role in the Flood City until it was retired 19 years later, on June 11. As the first such car to operate within any Pennsylvania trolley museum track network, it continues to do so more than four decades later.

It is now one of many in the collection emanating form such Pennsylvania cities as Johnstown itself, York, Harrisburg, Scranton, and Philadelphia, and is part of its larger fleet of 35 in-service and under-restoration city and suburban, interurban, rapid transit, and maintenance-of-way cars.

York Car Number 163 is one of them. Constructed in 1924 by the J. G. Brill Car Company of Philadelphia, and constituting the museum's most extensively restored example, the trolley was one of five with curved sides operated by York Railways. Subsequently used as a summer home positioned just north of the city on the Conewago Creek, before being thrust from its foundation by Hurricane Agnes in 1972, it was subsequently donated to the museum. Now a collection of hybrid parts, including wheels and motors from Japan, seats from Chicago, and cane coverings from China, it became the world's only-operable example from York after the equivalent of 17 years of volunteer restoration.

Oporto Car Number 172 is an example of a smaller, single-axle car. Built and used by the Sociedades do Transportes Colectivos do Porto, or S.T.C.P., in 1929, the extensively brake-equipped vehicle, comprised of air, hand, and dynamic systems, was well suited to the Portuguese hilly city.

Ship-transported across the Atlantic and then road-conveyed from Philadelphia on a highway trailer, it immediately operated tourist excursion runs at the museum. Carved wood trim, brass fittings, sliding end doors, storable windows in roof pockets, and a three-abreast configuration constitute its ornate interior features.

The ,539 New Jersey Transit PCC Car Number 6, first ordered in 1945 as part of a 40-strong fleet by the Twin City Rapid Transit Company from the St. Louis Car Company, connected Minneapolis with St. Paul two years later, operating on the Interurban Line, for which it was ideally suited with its northern winter-combative galvanized steel body; significant, nine-foot width for interior volume; two-person conductor booths; and electric horns.

Its "PCC" designation, an abbreviation of "President's Conference Committee," stems from the fact that it was the result of the new trolley standards it created in an attempt to increase street car ridership, which had increasingly migrated to individual automobiles.

Car Number 6, one of 30 acquired by Newark, New Jersey-based Public Service Coordinated Transport in 1953 after the Minnesota system had substituted its own trolleys with diesel buses, plied the short, 4.5-mile, municipally-owned Newark City Subway. But the late-1990s signaled its own end when the trolley line was converted to a light rail one.

Having been the second of the last to operate over the network before it was withdrawn from service, it hibernated in storage for a decade until it was purchased by the Rockhill Trolley Museum in 2011.

Philadelphia Transportation Company Car Number 2743 is another product of the President's Conference Committee. Sporting a line of small, "standee windows" above the standard-sized ones, it offered increased acceleration and decreased interior noise levels over the older cars it replaced, operating with the Philadelphia Transportation Company from 1947 to 1993, a year after which it was acquired by the museum--although its five-foot, 2 1/4-inch wheel trucks had to be replaced with four-foot, 8 ½-inch ones before it could run on its tracks.

Capable of sustaining 70-mph speeds, and sporting contoured, bullet-shaped ends, Philadelphia and Western Railroad Car Number 205 is the "bullet car" in the collection. Manufactured by Brill in 1931, the aerodynamic-appearing vehicle employed lightweight aluminum, reducing structure weight, fostering increased speed, and requiring reduced power to propel, siphoning its electricity to run from a third rail and therefore not sporting the otherwise traditional trolley pole. Secondarily acquired by the Southeastern Pennsylvania Transit Authority, or SEPTA, it provided 59 years of service before nudged into the museum's growing collection.

Its largest car is the "Independence Hall" Liberty liner. Spanning 156 feet in length, the permanently-attached, quad-car interurban, designed by the St. Louis Car Company in 1941, features eight, 125-hp articulated traction motors, and served the Chicago North Shore and Milwaukee Railroad's North Shore Line along with its identical twin, attaining 90-mph speeds on the windy city-Milwaukee sector. Both were designated "Electroliners."

Subsequently bought by the Philadelphia Suburban Transportation Company after the twin city link had been discontinued in 1963, the refurbished interurbans, named "Independence Hall" and "Valley Forge" Liberty Liners, entered service on its relatively short, 14-mile Norristown Line, for whose curves and hills it was less than optimal, although its passenger-popular tavern car sold alcoholic beverages, snacks, and meals during the trip.

Acquired by the Rockhill Trolley Museum after it was offered for sale in 1981, it appears similar, although for larger, then the only rapid transit car in its collection, Philadelphia Subway Number 1009.

Manufactured itself by the J. G. Brill Car Company in 1936, it saw initial deployment on the Delaware River Bridge Commission's Benjamin Franklin Bridge Line, shuttling passengers between Philadelphia and Camden. Its City of Brotherly Love service was retained with the Broad Street Subway, which subsequently purchased it and operated it until 1984, at which time it was replaced by state-of-the-art Japanese cars and donated to the museum.

Track-plying maintenance vehicles also take their place in the collection. Philadelphia and Western Railroad plow Number 10, for instance, a "sheer plow" produced by the Wason Manufacturing Company in 1915, canted snow to either side of the track. Bought from SEPTA in 1988, it is the last snowplow trolley to have been used by any US transit system, although it is employed by the museum for the same track-clearing purposes.

Actual car maintenance and restoration can be viewed on shop and car barn tours, while six departures offer trolley ride opportunities on the 1.5-mile Shade Gap Branch of the East Broad Top Railroad, with which it closely coordinates, to Blacklog Narrows, passing the remains of the original iron furnaces, which are now reduced to skeletal brick walls and coke oven ruins. A single ticket accesses unlimited rides for the day, which take about an hour for the three-mile round-trip. Like the East Broad Top Railroad itself, which the trolleys usually meet upon return, the Rockhill Trolley Museum, open on weekends between June and October, schedules several seasonal trips, including those highlighting trolley equipment, fall spectaculars, and Pumpkin Patch, Polar Bear Express, and Santa runs. Its gift shop features a rail-related photographic collection.


Riding the Rails in Rockhill Furnace, Pennsylvania

Coupon Toro Electric Trimmer Leaf Blowers Best Grand Sale

Thursday, 22 December 2011

Earthwise PS40008 8-Inch 6 amp Electric Telescopic Pole Saw with 3-Position Head and 10-Foot Reach

!: Comparison Earthwise PS40008 8-Inch 6 amp Electric Telescopic Pole Saw with 3-Position Head and 10-Foot Reach Free Shipping


Rate : | Price : $89.55 | Post Date : Dec 23, 2011 04:26:50
Usually ships in 24 hours

Earthwise 8" Corded Electric Pole Saw. High - up trimming job? Earthwise puts it in easy reach! No need for the ladder. The 8" Corded Pole Saw from Earthwise cuts big tasks down to size, with adjustable length, cutting angles, and a powerful 6-amp motor. Unbelievable power for its size, and at only 12 lbs., it's a cinch for anyone to use! Curb appeal: Telescoping, with a 9'6" fully-extended length; 3-position head: straight, 15, and 30; Powerful, efficient 6-amp motor; Sharp, reliable 8" Oregon chain and bar; Lightweight fiberglass pole with auxiliary handle for 360 rotation; Automatic bar and chain tension adjustments; Cord retention hook; 60Hz. Requires standard 120V power.; Order yours today! Please Note: Once item has contained gas, kerosene, butane, diesel, or oil it cannot be returned without calling for inspection instructions. WARNING: This item cannot be shipped to Canada. Please check your State, County and City laws for restrictions before ordering this product. Earthwise 8" Corded Electric Pole Saw

Black And Decker Tree Trimmer Quiz Used Coupons For Folgers Coffee Toro Blower Vacuum Quick

Monday, 12 December 2011

Factory-Reconditioned Homelite ZR43160 6 Amp Electric Pole Chain Saw

!: discounted Factory-Reconditioned Homelite ZR43160 6 Amp Electric Pole Chain Saw order


Rate : | Price : Too low to display | Post Date : Dec 12, 2011 08:20:18
Usually ships in 1-2 business days

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 6 Amp Electric Pole Chain Saw - ZR43160, Operator's Manual

Cheap Counter Rotating Tiller Promotional Travelpro Wheels Good Bargain Vegetarian Rice Crispy Treats

Tuesday, 6 December 2011

Some Essential Gardening Equipment Every Gardener Must Have

!: Some Essential Gardening Equipment Every Gardener Must Have

Gardening is a hobby, which involves many tasks. For some who has turned this hobby into a source of income, the use of gardening equipment is necessary. The kind of equipment that you use depends on the size of your garden. If you have a big garden, you will need several pieces of equipment to get things done more quickly.

With the advent of technology, gardening equipment nowadays have become more advanced and adaptive to the needs of the changing times. Although not all gardeners can afford to have those high-tech gardening tools available in the market, there are at least some basic tools that every gardener must have.

Most of these are hand tools, which are used for cultivating like rakes, shovels, trowels, spading forks, and diggers. The list can still go on, but these are only basic tools that can help you prepare your garden plot for planting.

Other useful gardening equipments are power tools, which are more expensive than hand tools. Power tools are designed for heavy tasks. The tiller is one of the most essential equipment as it breaks up ground, cuts large debris making the soil ready for planting, and mixes fertilizer and compost with the soil.

If you cannot afford to buy a tiller, you can rent one since it is only used during preparation of the soil for planting. Other power tools also include garden shredders, chippers and chain saws.

Pruning tools are also essential gardening equipment especially if you have shrubs and small trees in your garden. For thinner branches of about 3/4 inch diameter, the pruning shears can be used and for branches of about 2 inches in diameter, the lopping shears is perfect.

If you have tall trees in your backyard, the pole pruners are used to cut branches as high as 15 feet from the ground. Heavy-duty pruning tools are the pruning saws and hedge shears.

Since one of the basic and most important needs for a plant to survive is water, you will also need equipment to provide water to your plants. The water hose is the most common gardening devices especially for large gardens. If you have only a small size garden, the sprinklers will do.

Gardening equipment is important in managing a garden. Even if some gardeners would claim that they enjoy gardening more doing the dirty jobs by themselves, they still need basic tools. If you were making money out of your garden, investing in gardening equipment would be worth it.


Some Essential Gardening Equipment Every Gardener Must Have

Miele Dishwasher Salt Cheap Price Freezer Thermometer Wireless Water Pumps For Waterfalls Buy Online

Friday, 25 November 2011

3 Powerful Reasons to Use a Battery Backup System

!: 3 Powerful Reasons to Use a Battery Backup System

By the time you get done assembling the individual components of a pellet stove battery backup system you've spent somewhere around 0. Here's how they stack up: AGM type 75AH deep cycle battery 5, 1000 watt inverter 0, inverter cables , and finally a 3 stage battery charger for .

When you think about it, 0 is a lot of money to spend on an equipment array that will power a typical pellet stove for a maximum of 12 hours maybe once or twice year.

Common sense might tell you the same 0 would better be spent on a portable generator capable of powering multiple appliances for extended periods. But there are circumstances when a battery backup system makes more sense.

1. The power outages you experience are not usually weather related and therefore not long in duration. This has been my experience. Although I live in Boston and have sat through a few hurricanes, they rarely cause a power outage. More often than not, the power outages we experience are the result of somebody who got a few too many bad ice cubes hitting a utility pole.

2. Batteries don't make any noise. For some folks, noise is their biggest issue. Sounds that you or I would barely notice, like the hum of a space heater, are enough to drive some people to distraction. Can you imagine their response to a 2 stroke generator droning on for hours on end?

3. The components of a pellet stove backup system have numerous other applications. For instance, the battery charger is available 24 hours a day to diagnose and charge any type of 12 volt battery. The inverter could be hooked up to your car battery to run your lap top when you're on the road. You could take the inverter and charged battery camping to run or recharge your portable TV and laptop. Or, you could make the entire system completely portable by adding one or two solar panels to keep the battery charged anywhere under the sun.


3 Powerful Reasons to Use a Battery Backup System

Bunk Bed Rail Information Toro S620 Parts

Monday, 21 November 2011

Drywall Tools

!: Drywall Tools

As with Painting, it is necessary to have the proper tools to complete any kind of drywall work. Whether the project is large or small, the basic tools remain the same. The following is a list of tools and how they are used.

Mud Pan- The mud pan allows you to hold joint compound in, and work out of when you are patching or finishing drywall. These pans come in both plastic and metal and the cost depends on the brand and material used to make. If you are only planning on using the tools once or twice, I would suggest buying plastic. They are usually cheaper and clean up very easily. I have a plastic one that I have had for almost three years. I do not use it all of the time but it has held up very well.

Knife Set- The knife set is where you want to spend the most money. It is very important that you have a quality set of stainless steel drywall knives. Having the right knives can make your project easier or harder. You want to make sure that the knives that you are purchasing are not bent or have any flaws on the metal. The knives should, however, be slightly bowed. The purpose of the knives are to smooth out the drywall compound so that is why it is necessary for them to be flawless. I would suggest purchasing a 5" or 6" knife, an 8" knife, a 10", and a 12" knife. These sizes are most commonly used so should be sufficient for just about any project. You may also want to consider purchasing a smaller knife depending on your particular project. Sometimes there are those tight, hard to get to areas where a 1" or 2" knife comes in handy. The 5" and/or the 6" knife are used in the initial taping of the joints and to fill the screws. The larger knives are used to feather out the compound in order to create a smooth surface. The knives are used in a successive order from smallest to largest in order to feather our the area.

Drywall Tape- There are a couple of different options when it comes to joint tape. You can either buy a paper tape or a mesh tape. A lot of people use the mesh tape and like it. In my opinion, the paper tape is easier to work with. The mesh tape folds and creases and can be difficult to straighten out. The paper tape does fold on occasion but is easier to straighten out. Either one (paper or mesh) will do the job. It's all about personal preference.

Mixing Tools- It is very helpful to have mixing tools, especially in larger projects where large amount of drywall compound are going to be used. Trying to mix the compound and water by hand and achieve the proper consistency can be very strenuous over time. The mixing tools consist of a drill and a mixing paddle. The drill should ideally have two handles. Both the drill and paddle can normally be found in either the painting section of a hardware store or by the sheet rock. They can be costly, so you can rent them if you only plan on using them one time. You may also want to ask around to see if anyone you know has these tools. Trust me, it will make your life a lot easier having these tools.

Banjo- I am not talking about the guitar-like instrument. The banjo is a tool that holds the tape and compound all in one. It makes it a lot easier and faster to apply the tape to the joints using a banjo. It combines two steps into one. It is not a necessity, but very helpful for larger projects. Again, the banjo can be pricey. They usually run around 0 dollars, but it is well worth the cost. Other tape applying tools costs thousands of dollars so it is a good alternative. It takes a little practice to learn how to effectively use a banjo so do not get discouraged. Most of the problems are do to having the wrong compound consistency. Once you get that figured out, you should be good to go. I am not going to get into the more high tech taping tools because they can be very complex and are only useful to professional drywall finishers. The banjo should be sufficient for your project.

Sanding Tools- Sanding is a major element involved in properly finishing drywall. Unless you are only patching a small area, I recommend purchasing a sand pole. Having it will make the job a lot easier than if you try and do all sanding by hand. Even though the pole makes it easier, sanding is by no means fun. In fact, it is probably the most difficult part of the job. For this reason, having any tools that help should be welcomed. Not only is sanding the hardest part, it is also the dirtiest part. When sanding, you want to make sure that you where a mask or respirator to keep particles out of your lungs. You also want to make sure that all surrounding areas are sealed off with tarps or some sort of visqueen. Expect to have dust in unwanted areas despite sealing off the room. The idea is to minimize the amount of dust, not eliminate it all together. I have tried multiple ways to seal off rooms, and somehow it escapes into unwanted areas. In some cases, a wet sponge can be used as an alternative to sanding. This is usually only an option when the job is small (i.e., small patch/repair). If using a sponge, be careful not to apply too much pressure. Getting the compound wet makes it easier to damage. For this reason, I suggest using sand paper if you have not done it before.

There are, of course, many other drywall tools out there, but these should suffice for most novice drywall finishers. I usually only do minor drywall work and have found these tools to be the most helpful.


Drywall Tools

Low Price Olympus Om Lenses Good Robert Palmer Death

Tuesday, 15 November 2011

Troy-Bilt TBPS57 8-Inch 20 Volt Lithium-Ion Cordless Electric Pole Saw

!: Coupon Troy-Bilt TBPS57 8-Inch 20 Volt Lithium-Ion Cordless Electric Pole Saw buy

Brand : Troy-Bilt
Rate :
Price : $99.96
Post Date : Nov 16, 2011 04:39:10
Usually ships in 24 hours



Features a 8-Inch 20 Volt L-Ion pole saw only, 8-Inch Oregon low kickback B&C and manual chain adjustment. This model has a automatic oiler.

Bunk Bed Rail Toro Leaf Blowers Electric Buy Promotion Frye Boots Nyc

Friday, 11 November 2011

8 6 Amp 2-in-1 Electric Chain/Pole Saw Combo

!: Good bargain 8 6 Amp 2-in-1 Electric Chain/Pole Saw Combo Order Now

Brand : Earthwise
Rate :
Price : $132.34
Post Date : Nov 12, 2011 01:36:38
Usually ships in 1-2 business days



- 2 in 1: 8 Chain Saw or Pole Saw - Adjustable Handle Length (overall length, fully extended 9.6-Feet) - Two Section Lightweight Fiberglass Pole with Soft Grip - Telescoping Handle - 8 Oregon Chain and Bar

Caterpillar Toys Right Now

Tuesday, 8 November 2011

Sunday, 6 November 2011

Black & Decker NPP2018B 18 Volt Cordless Pole Chain Saw - Bare Tool (No Battery Or Charger)

!: Discount Black & Decker NPP2018B 18 Volt Cordless Pole Chain Saw - Bare Tool (No Battery Or Charger) sale

Brand : Black & Decker | Rate : | Price : $88.10
Post Date : Nov 06, 2011 09:30:23 | Usually ships in 1-2 business days


Save money and time by tackling pruning projects yourself--instead of hiring someone else to do it--with this ultra-efficient 18-volt cordless pole chain saw from Black & Decker. Complete with an 8.0-inch extension bar that lets you reach up to 14 feet and cut high branches without having to climb up on a ladder, this battery powered saw is both lightweight and easy to handle. There's also a rough-and-tough plastic handle and cleverly placed, powerful motor that won't get in the way of your view.

More Specification..!!

Purchasing Old Gringo Celeste Boots Last Minute Diy Irrigation System Tools Punch Fast

Monday, 31 October 2011

Homeless - Stranded, & Need Help

!: Homeless - Stranded, & Need Help

Even if you do not see them, they are there. Every day they are standing at the stoplight at the interstate ramp of I-40 at 15-501. They are holding signs that say, "Homeless, Stranded, Need Help." You might occasionally glance at them but you are careful to avoid eye contact. You wonder if they are really stranded and homeless. You wonder how much money they make. You wonder if they would accept an ordinary day job if someone offered it. You wonder what type of condition, circumstance, or character flaw allows these men to degrade themselves by begging for change at freeway stops. You occasionally take quick glances at their faces and see vacant, distant, pathetic expressions. You begin to notice the same expression on the faces of many other highway beggars in the area. You wonder what their lives are really like.

Maybe you do not wonder about any of this at all, but many of us do. I did. I became curious about two men who I had noticed standing every day at the 15-501 Exit off of I-40. One morning a few months ago (for reasons that I still do not understand) I pulled off the ramp and onto a service road. I walked through the underbrush, over a fence, across the ramp and approached one of the highway beggars. As I approached the homeless man, I mentally rehearsed a few openers to explain my interest. I slowly walked close enough to shake hands and introduce myself.

I said, "I've noticed you guys out here for a long time. Do you mind if I ask you a few questions?" The homeless man said, "What kind of questions?" "I don't really know, yet," I admitted. "I have this idea about making a videotape that describes what you guys are doing out here. I think a lot of people would be interested." "I don't know about a videotape, but we'll be happy to talk to you. I'm Charles."

He looked over into a stand of trees about 30 feet from the ramp. There were two other homeless men sitting on crates in what I later learned was their "break area." Charles pointed at me and yelled over the traffic noise to one of the other homeless men, "Talk to him!" He smiled at me and said, "His name is Bulldog. I can't talk to you right now. You can go talk to Bulldog if you want to."

Bulldog looked like a guy who had earned his nickname. He was a short, sturdy, tattooed guy with long hair. He was sitting with another man who appeared to have some type of skin disorder. I walked over and sat down in the break area and started chatting with Bulldog. He told me that he was a former Navy Seal. He said that he had been on the highway ever since both of his parents died many years ago. He said that he and Charles worked together and that they had been standing at this same ramp for almost two years. I must have looked surprised that they had been at the same spot for so long. Bulldog explained, "We're all out here waitin' for something. Charles over there is waitin' to get his driver's license back. Ralph here is waitin' for his disability claim to go through. Everybody out here is waitin' for something." I asked, "What are you waiting for, Bulldog?" Bulldog looked up to the sky, raised his hands into the air and said, "I'm waitin' to be taken up by Jesus."

Eventually Charles joined us in the break area. He appeared to be a respected leader among the group. He told me that he previously worked for thirteen years for an electric company in the area. He had been married and had several children. His life had taken a sour turn a few years ago when he lost his driver's license. He was a little vague about how this happened, but he said the loss of his driver's license started a chain reaction of negative events that left him with no way to earn money.

I brought up the idea of making a videotape to tell some of these stories. Bulldog made it very clear that he was not interested. Charles said, "We don't know you well enough for something like that. But you can come out here anytime to talk with us if you want." His invitation led to a series of visits over the next several months. During these visits I learned a great deal about their lives. I also grew to like these guys.

The first few conversations focused primarily on the mechanics of their work as panhandlers. Charles and Bulldog told me that they "own" the ramp at I-40 and 15-501. They sometimes share their ramp with a few other local people, and they are happy to share "shifts" with drifters who are just passing through. I asked Bulldog if other panhandlers ever challenged their ownership of the ramp. He looked over into the trees at a long metal pole and said he was not worried about that. He said it was "sort of a code of the West" that panhandlers respected each others' property rights. Charles and Bulldog start early enough each morning to catch the rush hour traffic.

They take a long break about ten o'clock. They return in the afternoon around three and work through evening rush hour. They work in thirty minute shifts. One of them stands on the ramp with a sign while the other sits on a crate in the break area. They are a team, and they work together well. They pool their revenue and share expenses. They say they each can make about ten to twelve dollars a day, but I suspect that they may make a little more than that. Charles has studied the giving patterns of people passing by and can predict which days will be better than average. For example, he said, "Fridays before holiday weekends are always our best days."

Charles and Bulldog live together in a campsite in the woods near the Interstate. They do not reveal the location of the campsite but they appear to be very proud of it. They each have a tent, sleeping bag and a propane tank. They live in this campsite year round, regardless of the temperature. They store water in containers and take "half a bath" at the campsite each morning. The other "half a bath" they take in the restroom at Wal-Mart. They take pride and satisfaction in their ability to live independently in the woods. They correctly pointed out that, "Not everybody can to do it."

Eventually, I learned that Charles and Bulldog have "regulars" who frequently give them food. Bulldog told me that he once returned to the break area after being away for a while, and someone had left food on top of one of the crates. On one occasion while we were talking, they were eating freshly baked bread given to them that morning by a truck driver from a bakery. In fact, they seemed to have plenty of food. "What we really need," Bulldog said, "is propane fuel and bug repellent to get rid of the ticks."

Charles and Bulldog told me that each panhandler in Durham must buy a permit for twenty dollars from the city or be subject to a fine. This permit includes a photo ID that the panhandler must wear when working. This requirement became relevant one afternoon when I was at the Interstate ramp during a visit from the Durham police. A young policeman parked his patrol car and approached the break area where I was sitting with four panhandlers. Everyone but me quickly stood up and displayed his ID card. When the cop asked to see my permit, Charles said, "This guy is some kind of social worker. He's okay." The friendly cop accepted the harmless but untrue explanation and left.

I think the police actually like the panhandlers at the 15-501 ramp, and I can understand why. On another day while I was visiting the ramp, a car at the intersection started to smoke from under the hood. A young woman driving the car panicked and immediately called 911 on her cell phone. Charles approached the car and asked if he could help. The distraught woman said that she thought her car was on fire. Charles asked for permission to look under the hood where he saw a small leak in one hose. He reassured the woman that her car was fine. He called Bulldog over to help push the car out of the road and onto the curb. Within minutes a police car and a fire truck were at the scene. Charles took charge. He explained the circumstance to the patrolman and told him, "Everything is under control." The police and fire department quickly moved on to other matters. When the woman's husband arrived, Charles continued to manage the situation in a way that minimized the young woman's embarrassment for overreacting. Later Charles told me that he and Bulldog often manage situations like that at "their intersection."

Charles, Bulldog, and the other panhandlers I met are not ashamed about begging for money. Their acceptance of begging challenges the stereotypes about work and self sufficiency that most men in our culture are stuck with, whether we like it or not. I think Charles and Bulldog have created some sophisticated rationalizations that make them more comfortable with begging. For example, Charles says, "At least we are not stealing money. We would rather accept what people give us than steal it." Another rationalization is supported by the permit that they wear. They say, "If there was something wrong with panhandling why would the city sell us a permit to do it?" One of their friends said, "I am not proud of standing out here with a sign but I am proud of being able to live on my own in the woods."

After two years at the same Interstate ramp, Charles and Bulldog have established some very strong relationships beyond the community of fellow panhandlers. The strongest of these relationships is with a group of Divinity School students from Duke University. This handful of students has created the 15-501 Ministry that exists to serve the handful of panhandlers near the 15-501 intersection. Every Sunday afternoon the students set up a small tent at the end of a service road and conduct a Christian church service for the panhandlers. The students return every Monday afternoon and serve a free meal. The students have a very strong friendship with Charles and Bulldog that appears to be based on mutual trust and respect. One of the students is helping Charles get his driver's license back.

Charles and Bulldog do not have a house, but I do not think they are homeless. They have a comfortable campsite and people who give them enough money and supplies to eat reasonably well. They even have a sense of independence that comes with being free spirits who are able to make a home in the woods. In some ways they have more than a house. They have created a genuine community.

I do think that they are stranded and need help. Charles expressed it best when he said, "If somebody drove by in a car and gave me a thousand dollars it wouldn't make any difference. I could get an apartment and pay the deposits and two months' rent. After that I would be right back out here, but I would have lost this ramp and lost my campsite." I think he is stranded on the Interstate ramp because he cannot take the risk to leave and let go of what little he already has.

Their situation seems similar to many of us who drive by on their ramp. We own cars and live in houses, but many of us are still stranded in one situation or another. Some of us are stranded in painful relationships. Some of us are stranded in dead end jobs or in mindless routines. Some of us are stranded on Interstate ramps. Maybe the common thread is our inability to take our own version of risk that threatens what little we have.

Sparky, another member of the 15-501 panhandling community, told me he has been standing on I-40 with a sign since 1991. I asked, "How long are you going to do this?" He said, "Only three more years. Then I'm going to retire." He sounded just like countless other people who tread water while waiting for retirement. Maybe we avoid eye contact with the panhandlers because we do not want to face what we have in common.


Homeless - Stranded, & Need Help

Tignanello Suede Handbags Decide Now Frye Paige Studded Boot Immediately

Monday, 24 October 2011

Different Types Of Chain Saws

!: Different Types Of Chain Saws

You can use chain saws for tree trimming in the garden, cutting down trees for firewood and making log furniture. Various types are available from chief manufacturers for every possible application. Before buying a chain saw consider some specific things to ensure that you are buying the right saw.

Styles

Customer chain saws are most excellent for individuals who rarely need a saw. There are many features they can have in quality product. You can get consumer saws in significantly low cost in comparison with the saws used by the professionals. These saws don't have so much power, but a high level of power is barely required for the occasional use.

Usual them have many design features similar to the saws used by the experts. They are more powerful and perform better than consumer saws. These saws are the best for common utilization. House owners with plenty of trees and large possessions generally use them. They are also used for farm use. These saws are powerful and durable and thus work well.

For daily use professional saws are just perfect. These saws are made for hard wearing use and can resist heavy use every day. You can find it up to a six-foot bar, which ranges from light weight to hard wearing.

Manufacturers

You can have Husqvarna chain saws in a variety of sizes and models. You will get the 137 model, which is a first-rate, inexpensive gas powered saw having compact size and light weight, which makes it easy to handle. It is fine for light household tasks.

Another is 346XP model. It is a high power, professional saw, which has an ergonomic design and slim body. This saw is more appropriate for heavier use and larger jobs than the previous model.

You will get Stihl chainsaws in a variety of sizes and patterns. For the common homeowner The M180 is excellent. It's easy to start and quick chain adjusting process makes this model user-friendly.

Facts you should consider when buying chain saws

First decide how much will you use the saw? Consider a professional saw if you are buying for heavy use. But when you are buying for an occasional use, a consumer saw is just right for you. You should consider the length of the bar also and this is determined by the size of the trees you are going to cut. Usually you can cut a tree up to twice the length of a bar.

Size of the engine: Large bars require larger engines. Keep in mind, the weight of the saw increases according to the size of the engine.

Maintaining the saw:

You have to do some simple things such as changing the filter and spark plug to keep it functioning. Furthermore, you have to learn adjusting the chain tension of the saw.


Different Types Of Chain Saws

Secrets Cheap Skylights

Tuesday, 18 October 2011

From Bear Cubs to Totem Poles, Chain Saw Art is Going Public

!: From Bear Cubs to Totem Poles, Chain Saw Art is Going Public

While a chain saw may not be first tool that comes to mind when we think of art, chain saw sculptures (both wood and ice) can be breathtaking. Growing in popularity since the 1950s, this art form has expanded far beyond adorable wooden bear cub sculptures and rustic carved signs. Now, artisans produce everything from life-sized dogs, moose, people, and turtles to 20-foot tall totem poles.

The International Appeal of Chain Saw Art

Beyond the United States, chain saw art can be found around the globe in Africa, Australia, Canada, Europe, and Japan. In fact, the first chain saw carving World Championships appeared in 1987.
More recently, the Ridgway Rendezvous has been billed as the largest chain saw carving event in the world. In this Pennsylvanian town, more than 200 international carvers have participated in a week long celebration. Their carvings raised tens of thousands of dollars to benefit the Make-a-Wish Foundation, the premiere organization that grants wishes to children with life-threatening medical conditions.

Using a Chain Saw with Artistry

Often, chain saws are used to begin the carving process because they can sculpt in a fraction of the time required to carve with mallets and gouges alone. Chain saw blades and chains are now available that have been specifically designed for carving. Chain saw sculptures may be completed with more conventional tools, such as chisels, knives and even other power tools.

The International organization of chain saw carvers offers online art galleries, forums, website listings, auctions, and information about exhibits to members.

What You Need to Know Before You Try This at Home

Becoming a skilled chain saw artisan requires instruction and practice, especially in how to safely operate the saw. It's estimated that more than 40,000 people suffer chain saw injures every year.
Chain saws should have anti-kick back features that should not be removed. Plus, storing chain saws where children or even teenagers could access them is just as dangerous as storing guns and ammunition unsafely.

Always keep in mind that personal protection is also important for your eyes, hearing and skin.


From Bear Cubs to Totem Poles, Chain Saw Art is Going Public

Usb Mixer Dj Tips Liver

Thursday, 14 April 2011

Some parts of the common material of Landscaping

!: Some parts of the common material of Landscaping

Many garden care includes cutting vegetables and so there are many types of landscape materials that can use it. These include gas and electric chain saws, ratchet pruners, electric hedgers and trimmers.

Gas and electric chain saws, ratchet shears, hedge clippers and electric

Remington electric chain saw is a gas powered chain saw, which is operated by gas or oil and mix, even if it is used to calculate theRatio is still very useful material for landscaping. The electric version will start easily, while the gas chain saws tore the starter rope to start it. Electric chainsaws are easy to handle when cutting starts working and the 14 "Remington weighs only 5.23 pounds.

Ratchet pruners are used to cut thick branches easily and are more useful than the ordinary saws handle these tasks. They also allow the settings of the multiplication of the ratchetforce the hand and this means that all work is done with the instrument and if you know how to handle it. When cutting a branch, the Ratchet and then click to the next setting of the pressure to offer more than just a moving average, and landscaping equipment is ideal for those who have a disease hand.

Electric hedge trimmers are inexpensive and easy pieces of landscaping equipment are used when working with gas models are compared for a better solution. The electricHedge Trimmers start automatically, but there are also many similarities, both the electricity and gas trimmers.

For those who are ready to mow their lawns and the need to cut the grass that were not removed from the mower, trimmer battery-powered landscaping equipment is ideal for these purposes would be used. It would make the work relatively easy and not have to worry about cutting supply and is fairly easy andcan be easily transported from one end of the court for each other. 18 V power supply may not be as efficient as gas-powered models, but it's good for a mower and the battery can keep the fee for a half hour. Cordless trimmers are clean and portable, if you do not have to recharge the batteries occasionally.

Another piece of equipment on the landscape, the tree pruner pole that is safe, especially for those who useare trees that are small or medium-sized companies trim. The pole pruner allows a person to maintain their trees in the right form and there is no need to use a ladder to climb during the cut.

Some parts of the common material of Landscaping

!: Learn Commercial Bridge Loans

Friday, 1 April 2011

Oregon S56 16-Inch Semi Chisel Chain Saw Chain Fits Craftsman, Echo, Homelite, Poulan, Remington

!: Comparison Oregon S56 16-Inch Semi Chisel Chain Saw Chain Fits Craftsman, Echo, Homelite, Poulan, Remington purchase online

Brand : Oregon | Rate : | Price : $11.99
Post Date : Apr 02, 2011 06:40:05 | Usually ships in 1-2 business days


  • Semi-chisel chainsaw chain for Craftsman, Echo, Homelite, Poulan, and Remington brands
  • Precision cutting chain, heat-treated, and hard-chromed cutter chain
  • Unique cutter design cuts smooth and fast with minimum kickback
  • Engineered for safety, performance, and quality
  • Advanced technology ensures tough, sharp cutters

More Specification..!!

Oregon S56 16-Inch Semi Chisel Chain Saw Chain Fits Craftsman, Echo, Homelite, Poulan, Remington

!: Best Electric Grass Trimmer Fast !: Baby Lulu Crib Bedding Tutorial !: Learn How Vacuums Cleaners

Sunday, 20 March 2011

Chain Saw Pole: And Save Money 'Doing Yourself

!: Chain Saw Pole: And Save Money 'Doing Yourself

It used to be that if some members of which are cut or trimmed in one of your trees, there were only a few options was necessary. Or you could for your own safety and climb a ladder or a tree with a chain saw or loppers and take care of it for your car. Or you could use a property for a local tree company to come looking for you to spend. With the introduction of a pole chain saw, you do not have your safety at risk or empty wallet.

A chain saw polebasically like a small chainsaw at the end of an auction. Usually reaches about 10 arts 'to 15' above the ground, depending on the height and length of the barrel. Some of them reached telescopic pole to even greater heights.

Many major manufacturers such as Black & Decker, Stihl, Remington, and producing these saws Husqvarna. Most of them are gas-operated, while others run on batteries. These saws are for the care of twigs orsmall, dangerous overhanging limbs around your home. I will not try to use a larger office, like most of them can only cut limbs up to 8 cm in diameter. Usually the leaves are only 6 "to 10" long.

So the next time you have to take care of some light pruning, your hard earned money and not risk injury. Head down to the neighborhood hardware now take a pole chain saw to take care of itself. You will not regret.


Chain Saw Pole: And Save Money 'Doing Yourself

!: Oase Pond Pumps Sale Off

Sunday, 13 March 2011

Oregon S40 10-Inch Semi Chisel Chain Saw Chain, Fits Craftsman, Poulan, Remington

!: The Best Places to Buy Oregon S40 10-Inch Semi Chisel Chain Saw Chain, Fits Craftsman, Poulan, Remington buy online

Brand : Oregon
Rate :
Price : $9.04
Post Date : Mar 13, 2011 17:40:12
Usually ships in 1-2 business days



S40 Features: -Semi chisel chain saw chain. -Fits craftsman, poulan, remington. -Precision cutting chain, heat-treated, and hard-chromed cutter chain. -Unique cutter design cuts smooth and fast with minimum kickback. -Engineered for safety, performance, and quality. -Advanced technology ensures tough, sharp cutters. -Semi chisel. -ID link. -91VG chain type. -0.38'' pitch.

!: Low Price Echo Chipper Shredder


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。